Author Topic: vompclient don't start  (Read 3851 times)

Offline clausmuus

  • Full Member
  • ***
  • Posts: 125
    • View Profile
    • MLD
    • Email
vompclient don't start
« on: February 05, 2013, 08:50:25 »
Hi Marten,

the latest version of the vompclient don't will start. It only switch for a short time to a black screen. Maybe you have an idea. Here is the log:
Code: [Select]
09:43:16.827874 [info]   2867 Core - Starting up...
09:43:16.831514 [info]   2867 Core - Signal handlers set up successfully
09:43:16.833712 [EMERG]  2867 Core - Could not retrieve free virtual console, please change permissions
09:43:16.836090 [notice] 2867 Remote - Probe /dev/input/event0
09:43:16.838860 [notice] 2867 Remote - Add /dev/input/event0 to List
09:43:16.841269 [notice] 2867 Remote - Probe /dev/input/event1
09:43:16.848807 [notice] 2867 Remote - Add /dev/input/event1 to List
09:43:16.851969 [notice] 2867 Remote - Probe /dev/input/event2
09:43:16.853403 [notice] 2867 Remote - Add /dev/input/event2 to List
09:43:16.854834 [notice] 2867 Remote - Probe /dev/input/event3
09:43:16.856233 [notice] 2867 Remote - Add /dev/input/event3 to List
09:43:16.858477 [notice] 2867 Remote - Probe /dev/input/event4
09:43:16.859913 [notice] 2867 Remote - Add /dev/input/event4 to List
09:43:16.865828 [notice] 2867 Remote - Init LibCEC
09:43:17.407224 [notice] 2867 Remote - CEC: No adapter found
09:43:17.419940 [info]   2867 Core - Remote module initialised
09:43:17.421995 [info]   2867 Core - LED module initialised
09:43:17.423724 [info]   2867 Core - Mtd module initialised
09:43:17.426192 [info]   2867 Core - Timers module initialised
09:43:17.428987 [info]   2867 Core - Read from MTD: PAL 720x576
09:43:17.438584 [debug]  2867 Video - vc_gencmd_send failed ffffffff
09:43:17.440934 [debug]  2867 Video - Setting aspect to 0: PAR 12 11
09:43:17.442446 [notice] 2867 Video - HDMI plugged
09:43:17.443879 [notice] 2867 Video - HDMI set
09:43:17.445652 [notice] 2867 Video - No CEA fall back to DMT modes
09:43:17.447094 [notice] 2867 Remote - Shutdown libcec begin
09:43:17.449712 [debug]  2867 Remote - CECLOG: 447 4 unregistering all CEC clients
09:43:17.459480 [debug]  2867 Remote - CECLOG: 457 4 unregistering all CEC clients
09:43:17.461740 [debug]  2867 Remote - CECLOG: 459 4 unregistering all CEC clients
09:43:17.464968 [notice] 2867 Remote - Shutdown libcec end
09:43:17.466602 [notice] 2867 Video - Switch to prefered mode
09:43:17.469592 [notice] 2867 Remote - Probe /dev/input/event0
09:43:17.476495 [notice] 2867 Remote - Add /dev/input/event0 to List
09:43:17.477906 [notice] 2867 Remote - Probe /dev/input/event1
09:43:17.479151 [notice] 2867 Remote - Add /dev/input/event1 to List
09:43:17.482565 [notice] 2867 Remote - Probe /dev/input/event2
09:43:17.483873 [notice] 2867 Remote - Add /dev/input/event2 to List
09:43:17.485070 [notice] 2867 Remote - Probe /dev/input/event3
09:43:17.486678 [notice] 2867 Remote - Add /dev/input/event3 to List
09:43:17.491467 [notice] 2867 Remote - Probe /dev/input/event4
09:43:17.492687 [notice] 2867 Remote - Add /dev/input/event4 to List
09:43:17.501617 [notice] 2867 Remote - Init LibCEC
09:43:17.899902 [notice] 2867 Remote - CEC: No adapter found
09:43:17.903725 [debug]  2867 Video - Init OMX failed 80001009
09:43:17.908043 [EMERG]  2867 Core - Video module failed to initialise
09:43:17.909970 [notice] 2867 Core - BoxStack module shut down
09:43:17.912302 [notice] 2867 Core - Command module shut down
09:43:17.918988 [notice] 2867 Core - VDR module shut down
09:43:17.921435 [notice] 2867 Core - OSD module shut down
09:43:17.923238 [notice] 2867 Core - Audio module shut down
09:43:17.925044 [notice] 2867 Video - Shutdown video module
09:43:17.926418 [debug]  2867 Video - enter deallocatecodecsomx
09:43:17.932153 [debug]  2867 Video - leave deallocate codecs OMX
09:43:17.955791 [notice] 2867 Core - Video module shut down
09:43:17.956262 [debug]  2867 Timers - Timers shutdown start
09:43:17.958927 [debug]  2867 Timers - Timers shutdown end
09:43:17.968377 [notice] 2867 Core - Timers module shut down
09:43:17.970190 [notice] 2867 Core - MTD module shut down
09:43:17.972555 [notice] 2867 Core - LED module shut down
09:43:17.974653 [notice] 2867 Remote - Shutdown libcec begin
09:43:17.978744 [debug]  2867 Remote - CECLOG: 471 4 unregistering all CEC clients
09:43:17.980213 [debug]  2867 Remote - CECLOG: 472 4 unregistering all CEC clients
09:43:17.982484 [debug]  2867 Remote - CECLOG: 475 4 unregistering all CEC clients
09:43:17.984883 [notice] 2867 Remote - Shutdown libcec end
09:43:17.989092 [notice] 2867 Core - Remote module shut down
09:43:17.990451 [notice] 2867 Core - WOL module shut down
09:43:17.999896 [notice] 2867 Core - Sleeptimer module shut down
09:43:18.001632 [notice] 2867 Core - Log module shutting down... bye!
And here I have the tvservice output:
Code: [Select]
tvservice -m CEA
Group CEA has 14 modes:
           mode 1: 640x480 @ 60Hz 4:3, clock:25MHz progressive
           mode 2: 720x480 @ 60Hz 4:3, clock:27MHz progressive
           mode 3: 720x480 @ 60Hz 16:9, clock:27MHz progressive
           mode 4: 1280x720 @ 60Hz 16:9, clock:74MHz progressive
           mode 5: 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced
  (native) mode 16: 1920x1080 @ 60Hz 16:9, clock:148MHz progressive
           mode 17: 720x576 @ 50Hz 4:3, clock:27MHz progressive
           mode 18: 720x576 @ 50Hz 16:9, clock:27MHz progressive
           mode 19: 1280x720 @ 50Hz 16:9, clock:74MHz progressive
           mode 20: 1920x1080 @ 50Hz 16:9, clock:74MHz interlaced
           mode 31: 1920x1080 @ 50Hz 16:9, clock:148MHz progressive
           mode 32: 1920x1080 @ 24Hz 16:9, clock:74MHz progressive
           mode 33: 1920x1080 @ 25Hz 16:9, clock:74MHz progressive
           mode 34: 1920x1080 @ 30Hz 16:9, clock:74MHz progressive
The running vompserver is not the latest version. I hope this is not the reason :)

Claus
MLD - A Distribution also for the Raspberry PI

Offline MartenR

  • Hero Member
  • *****
  • Posts: 789
    • View Profile
Re: vompclient don't start
« Reply #1 on: February 06, 2013, 07:26:03 »
Here is the line:
Quote
Init OMX failed 80001009
So the initialization of the OMX system failes with error code 80001009.
Are you using a libcec with raspberry pi support compiled in. (vomp relies on a initialisation of some raspberry interfaces through libcec). So did you change something with libcec?
But there may be other reasons why it fails.

Marten


Offline clausmuus

  • Full Member
  • ***
  • Posts: 125
    • View Profile
    • MLD
    • Email
Re: vompclient don't start
« Reply #2 on: February 06, 2013, 22:26:03 »
Hi,

I have mode no changes on libcec. I use the version 1.9.0, since newer versions don't compile. I use this version since the last half a year.
With the last update, I update also the Kernel to the 3.6.11 (latest version) and the firmware to the latest version. But I think this should not be the problem, since an older version (I compiled in december) runs without problems on this system.

Do you have any further ideas where I do the mistake? If you have no idea, I will try a recompile of the hole system.

Claus
MLD - A Distribution also for the Raspberry PI

Offline MartenR

  • Hero Member
  • *****
  • Posts: 789
    • View Profile
Re: vompclient don't start
« Reply #3 on: February 07, 2013, 07:08:24 »
No, no ideas. Just to inform you 80001009 means OMX_ErrorHardware. (You can look at https://github.com/raspberrypi/userland/blob/master/host_applications/framework/common/ilcore.c) and see that ilcs is not inited.

Marten

Offline clausmuus

  • Full Member
  • ***
  • Posts: 125
    • View Profile
    • MLD
    • Email
Re: vompclient don't start
« Reply #4 on: February 25, 2013, 10:34:29 »
OK, I found the reason. I have the problem, since I use the version 1.9 of the libcec. This version has a bug, that disable the RPI support. If I try to enable the support by configure switch, I get only a error message. Now I'm locking for a version of the libcec, that can be compile with RPI support and is compatible to the vompclient.

Claus
MLD - A Distribution also for the Raspberry PI

Offline clausmuus

  • Full Member
  • ***
  • Posts: 125
    • View Profile
    • MLD
    • Email
Re: vompclient don't start
« Reply #5 on: February 25, 2013, 15:36:27 »
OK, I have kreate a patch, that update the libcec 1.9.0 configure.ac for the actual vc lib.

Claus
MLD - A Distribution also for the Raspberry PI