Vomp Client no Live TV

[tinitus]

After a hdd Crash I get this Error on VOMP Server:

10:34:46.307096 [debug]  MVPReceiver - VDR inactive, sending stream end message
10:34:46.308124 [debug]  Client - Received chan=3 kats=1376901285
10:34:46.308169 [debug]  Client - Waiting
10:34:47.385572 [info]   Main - Stopped main server thread
10:34:48.469229 [info]   Main - Logging started
10:34:48.469278 [debug]  Config - Config error: Key UDP port not found
10:34:48.469304 [debug]  Config - Config error: Key Server name not found
10:34:48.469326 [debug]  Config - Config error: Key TCP port not found
10:34:48.469352 [debug]  UDPReplier - UDP replier started
10:34:48.469378 [debug]  Config - Config error: Key Bootp server enabled not found
10:34:48.469395 [debug]  Config - Config error: Key TFTP server enabled not found
10:34:48.469409 [debug]  Config - Config error: Key MVPRelay enabled not found
10:34:48.469416 [info]   Main - Not starting Bootpd
10:34:48.469420 [info]   Main - Not starting TFTPd
10:34:48.469437 [debug]  MVPRelay - MVPRelay replier started
10:34:48.469454 [info]   Main - MVPRelay started
10:34:48.469490 [debug]  Main - MVPServer run success
10:36:46.291654 [debug]  UDPReplier - UDP request from 192.168.3.201
10:36:47.796530 [debug]  Client - Config dir: /etc/vdr/plugins/vompserver
10:36:47.796591 [debug]  MediaPlayer::registerMediaProvider - p=0x7f37280015b0
10:36:47.796608 [debug]  MediaLauncher - init
10:36:47.796666 [debug]  Config - Config error: Section Media not found
10:36:47.796702 [debug]  Config - Config error: Section Media not found
10:36:47.796734 [debug]  Config - Config error: Section Media not found
10:36:47.796765 [debug]  Config - Config error: Section Media not found
10:36:47.796796 [debug]  Config - Config error: Section Media not found
10:36:47.796827 [debug]  Config - Config error: Section Media not found

10:36:49.655893 [debug]  RRProc - name: 'TELETOON+'
10:36:49.658013 [debug]  RRProc - Written channels list
10:36:49.658046 [debug]  RRProc - threadMethod waiting
10:36:50.380757 [debug]  Client - Received chan=1, ser=188, op=10, edl=12
10:36:50.380813 [debug]  RRProc - recvReq
10:36:50.380831 [debug]  RRProc - recvReq set req and signalled
10:36:50.380842 [debug]  Client - Waiting
10:36:50.380866 [debug]  RRProc - thread woken with req, queue size: 1
10:36:50.380917 [debug]  RRProc - get schedule called for channel 1
10:36:50.380937 [debug]  Client - Looking for channel 1::: number: 1 name: 'Das Erste HD'
10:36:50.380948 [debug]  Client - Found channel number 1, vpid = 5101, apid1 = 5102
10:36:50.380958 [debug]  RRProc - Got channel
10:36:50.380984 [debug]  RRProc - Got schedule!s! object
10:36:50.380995 [debug]  RRProc - Got schedule object
10:36:50.381223 [debug]  RRProc - Got all event data
10:36:50.381285 [debug]  RRProc - written schedules packet
10:36:50.381303 [debug]  RRProc - threadMethod waiting
10:36:50.400332 [debug]  Client - Received chan=1, ser=189, op=22, edl=4
10:36:50.400369 [debug]  RRProc - recvReq
10:36:50.400384 [debug]  RRProc - recvReq set req and signalled
10:36:50.400395 [debug]  Client - Waiting
10:36:50.400421 [debug]  RRProc - thread woken with req, queue size: 1
10:36:50.400465 [debug]  Client - Looking for channel 1::: number: 1 name: 'Das Erste HD'
10:36:50.400483 [debug]  Client - Found channel number 1, vpid = 5101, apid1 = 5102
10:36:50.400517 [debug]  RRProc - Written channels pids
10:36:50.400532 [debug]  RRProc - threadMethod waiting
10:36:50.402356 [debug]  Client - Received chan=1, ser=190, op=6, edl=4
10:36:50.402392 [debug]  RRProc - recvReq
10:36:50.402410 [debug]  RRProc - recvReq set req and signalled
10:36:50.402420 [debug]  Client - Waiting
10:36:50.402445 [debug]  RRProc - thread woken with req, queue size: 1
10:36:50.402488 [debug]  RRProc - req->dataLength = 4
10:36:50.402505 [debug]  Client - Looking for channel 1::: number: 1 name: 'Das Erste HD'
10:36:50.402517 [debug]  Client - Found channel number 1, vpid = 5101, apid1 = 5102
10:36:50.402527 [debug]  RRProc - Config: Live TV priority config fail
10:36:50.402537 [debug]  RRProc - Using live TV priority 0
10:36:50.402817 [debug]  MVPReceiver - VDR active
10:36:50.402890 [debug]  MVPReceiver - num mvp receivers now up to 1
10:36:50.402933 [debug]  RRProc - threadMethod waiting
10:36:56.407038 [debug]  Client - Received chan=3 kats=1376901413
10:36:56.407109 [debug]  Client - Waiting
10:37:02.410556 [debug]  Client - Received chan=3 kats=1376901419
10:37:02.410650 [debug]  Client - Waiting
10:37:08.416381 [debug]  Client - Received chan=3 kats=1376901425
10:37:08.416465 [debug]  Client - Waiting

My conf files


[General]

## Specify a log file here to enable logging

Log file = /tmp/vompserver.log

## If you have more than one vompserver running you
## can enter a name here that will appear on the
## server select list on the MVP

# Server name = My-Server

## Enable this to start the built in Bootp server
## Required to boot the MVP if you have not got a
## DHCP server that can tell the MVP its boot file
## name and server

# Bootp server enabled = yes

## Enable this to start the built in TFTP server
## Required to boot the MVP if you have not got a
## TFTP server running elsewhere

# TFTP server enabled = yes

## Base directory for TFTP server
## If you leave this blank the plugin config
## path will be used - i.e. where this file is

# TFTP directory = /tftpboot

## Change the following to "no" to disable the
## built in mvprelay server

# MVPRelay enabled = yes


and
[Boot]

## If you enable the bootp server in vomp.conf, you can specify
## an IP to give out to this MVP here.

# IP = 10.0.0.100

## If you have a router that gives out addresses but you want
## the above address forced to the MVP, set this:

# Override IP = 1

## A file name to send to the MVP. The MVP will then request
## this file from the TFTP server. Don't use a path here!

# TFTP file name = vomp-dongle

[General]

## The client auto-detects whether to use PAL or NTSC. If you
## want to force the other one, set it here. Beware of popping
## your TV with this one!

# Override Video Format = NTSC

I use vdr-2.0.2

Can you please help

Edit: Recordings working fine. Radio are also not working

I Use Vomp 0.4.0 Client and Server

[MartenR]

Looks fine on the server. Please look at the client side log file. Also please make sure that server version matches client version.

Marten

[tinitus]

Hello.

I use the vomp Client Binary from the loggytronic Howto, How can I check the Version on both Side (Server and Client) Only per tar file name?
How can I check the Client log?

[MartenR]

You can execute vompclient with "vompclient -d> debug.log" than you get a log file.
If you downloaded the same version for client and server it should be fine.

Marten