After a hdd Crash I get this Error on VOMP Server:
10:34:46.307096 [debug] MVPReceiver - VDR inactive, sending stream end message
10:34:46.308124 [debug] Client - Received chan=3 kats=1376901285
10:34:46.308169 [debug] Client - Waiting
10:34:47.385572 [info] Main - Stopped main server thread
10:34:48.469229 [info] Main - Logging started
10:34:48.469278 [debug] Config - Config error: Key UDP port not found
10:34:48.469304 [debug] Config - Config error: Key Server name not found
10:34:48.469326 [debug] Config - Config error: Key TCP port not found
10:34:48.469352 [debug] UDPReplier - UDP replier started
10:34:48.469378 [debug] Config - Config error: Key Bootp server enabled not found
10:34:48.469395 [debug] Config - Config error: Key TFTP server enabled not found
10:34:48.469409 [debug] Config - Config error: Key MVPRelay enabled not found
10:34:48.469416 [info] Main - Not starting Bootpd
10:34:48.469420 [info] Main - Not starting TFTPd
10:34:48.469437 [debug] MVPRelay - MVPRelay replier started
10:34:48.469454 [info] Main - MVPRelay started
10:34:48.469490 [debug] Main - MVPServer run success
10:36:46.291654 [debug] UDPReplier - UDP request from 192.168.3.201
10:36:47.796530 [debug] Client - Config dir: /etc/vdr/plugins/vompserver
10:36:47.796591 [debug] MediaPlayer::registerMediaProvider - p=0x7f37280015b0
10:36:47.796608 [debug] MediaLauncher - init
10:36:47.796666 [debug] Config - Config error: Section Media not found
10:36:47.796702 [debug] Config - Config error: Section Media not found
10:36:47.796734 [debug] Config - Config error: Section Media not found
10:36:47.796765 [debug] Config - Config error: Section Media not found
10:36:47.796796 [debug] Config - Config error: Section Media not found
10:36:47.796827 [debug] Config - Config error: Section Media not found
10:36:49.655893 [debug] RRProc - name: 'TELETOON+'
10:36:49.658013 [debug] RRProc - Written channels list
10:36:49.658046 [debug] RRProc - threadMethod waiting
10:36:50.380757 [debug] Client - Received chan=1, ser=188, op=10, edl=12
10:36:50.380813 [debug] RRProc - recvReq
10:36:50.380831 [debug] RRProc - recvReq set req and signalled
10:36:50.380842 [debug] Client - Waiting
10:36:50.380866 [debug] RRProc - thread woken with req, queue size: 1
10:36:50.380917 [debug] RRProc - get schedule called for channel 1
10:36:50.380937 [debug] Client - Looking for channel 1::: number: 1 name: 'Das Erste HD'
10:36:50.380948 [debug] Client - Found channel number 1, vpid = 5101, apid1 = 5102
10:36:50.380958 [debug] RRProc - Got channel
10:36:50.380984 [debug] RRProc - Got schedule!s! object
10:36:50.380995 [debug] RRProc - Got schedule object
10:36:50.381223 [debug] RRProc - Got all event data
10:36:50.381285 [debug] RRProc - written schedules packet
10:36:50.381303 [debug] RRProc - threadMethod waiting
10:36:50.400332 [debug] Client - Received chan=1, ser=189, op=22, edl=4
10:36:50.400369 [debug] RRProc - recvReq
10:36:50.400384 [debug] RRProc - recvReq set req and signalled
10:36:50.400395 [debug] Client - Waiting
10:36:50.400421 [debug] RRProc - thread woken with req, queue size: 1
10:36:50.400465 [debug] Client - Looking for channel 1::: number: 1 name: 'Das Erste HD'
10:36:50.400483 [debug] Client - Found channel number 1, vpid = 5101, apid1 = 5102
10:36:50.400517 [debug] RRProc - Written channels pids
10:36:50.400532 [debug] RRProc - threadMethod waiting
10:36:50.402356 [debug] Client - Received chan=1, ser=190, op=6, edl=4
10:36:50.402392 [debug] RRProc - recvReq
10:36:50.402410 [debug] RRProc - recvReq set req and signalled
10:36:50.402420 [debug] Client - Waiting
10:36:50.402445 [debug] RRProc - thread woken with req, queue size: 1
10:36:50.402488 [debug] RRProc - req->dataLength = 4
10:36:50.402505 [debug] Client - Looking for channel 1::: number: 1 name: 'Das Erste HD'
10:36:50.402517 [debug] Client - Found channel number 1, vpid = 5101, apid1 = 5102
10:36:50.402527 [debug] RRProc - Config: Live TV priority config fail
10:36:50.402537 [debug] RRProc - Using live TV priority 0
10:36:50.402817 [debug] MVPReceiver - VDR active
10:36:50.402890 [debug] MVPReceiver - num mvp receivers now up to 1
10:36:50.402933 [debug] RRProc - threadMethod waiting
10:36:56.407038 [debug] Client - Received chan=3 kats=1376901413
10:36:56.407109 [debug] Client - Waiting
10:37:02.410556 [debug] Client - Received chan=3 kats=1376901419
10:37:02.410650 [debug] Client - Waiting
10:37:08.416381 [debug] Client - Received chan=3 kats=1376901425
10:37:08.416465 [debug] Client - Waiting
My conf files
[General]
## Specify a log file here to enable logging
Log file = /tmp/vompserver.log
## If you have more than one vompserver running you
## can enter a name here that will appear on the
## server select list on the MVP
# Server name = My-Server
## Enable this to start the built in Bootp server
## Required to boot the MVP if you have not got a
## DHCP server that can tell the MVP its boot file
## name and server
# Bootp server enabled = yes
## Enable this to start the built in TFTP server
## Required to boot the MVP if you have not got a
## TFTP server running elsewhere
# TFTP server enabled = yes
## Base directory for TFTP server
## If you leave this blank the plugin config
## path will be used - i.e. where this file is
# TFTP directory = /tftpboot
## Change the following to "no" to disable the
## built in mvprelay server
# MVPRelay enabled = yes
and
[Boot]
## If you enable the bootp server in vomp.conf, you can specify
## an IP to give out to this MVP here.
# IP = 10.0.0.100
## If you have a router that gives out addresses but you want
## the above address forced to the MVP, set this:
# Override IP = 1
## A file name to send to the MVP. The MVP will then request
## this file from the TFTP server. Don't use a path here!
# TFTP file name = vomp-dongle
[General]
## The client auto-detects whether to use PAL or NTSC. If you
## want to force the other one, set it here. Beware of popping
## your TV with this one!
# Override Video Format = NTSC
I use vdr-2.0.2
Can you please help
Edit: Recordings working fine. Radio are also not working
I Use Vomp 0.4.0 Client and Server
Looks fine on the server. Please look at the client side log file. Also please make sure that server version matches client version.
Marten
Hello.
I use the vomp Client Binary from the loggytronic Howto, How can I check the Version on both Side (Server and Client) Only per tar file name?
How can I check the Client log?
You can execute vompclient with "vompclient -d> debug.log" than you get a log file.
If you downloaded the same version for client and server it should be fine.
Marten