Topics

Hi Marten,

the latest version of the vompclient don't will start. It only switch for a short time to a black screen. Maybe you have an idea. Here is the log:

Code Select Expand

09:43:16.827874 [info]   2867 Core - Starting up...
09:43:16.831514 [info]   2867 Core - Signal handlers set up successfully
09:43:16.833712 [EMERG]  2867 Core - Could not retrieve free virtual console, please change permissions
09:43:16.836090 [notice] 2867 Remote - Probe /dev/input/event0
09:43:16.838860 [notice] 2867 Remote - Add /dev/input/event0 to List
09:43:16.841269 [notice] 2867 Remote - Probe /dev/input/event1
09:43:16.848807 [notice] 2867 Remote - Add /dev/input/event1 to List
09:43:16.851969 [notice] 2867 Remote - Probe /dev/input/event2
09:43:16.853403 [notice] 2867 Remote - Add /dev/input/event2 to List
09:43:16.854834 [notice] 2867 Remote - Probe /dev/input/event3
09:43:16.856233 [notice] 2867 Remote - Add /dev/input/event3 to List
09:43:16.858477 [notice] 2867 Remote - Probe /dev/input/event4
09:43:16.859913 [notice] 2867 Remote - Add /dev/input/event4 to List
09:43:16.865828 [notice] 2867 Remote - Init LibCEC
09:43:17.407224 [notice] 2867 Remote - CEC: No adapter found
09:43:17.419940 [info]   2867 Core - Remote module initialised
09:43:17.421995 [info]   2867 Core - LED module initialised
09:43:17.423724 [info]   2867 Core - Mtd module initialised
09:43:17.426192 [info]   2867 Core - Timers module initialised
09:43:17.428987 [info]   2867 Core - Read from MTD: PAL 720x576
09:43:17.438584 [debug]  2867 Video - vc_gencmd_send failed ffffffff
09:43:17.440934 [debug]  2867 Video - Setting aspect to 0: PAR 12 11
09:43:17.442446 [notice] 2867 Video - HDMI plugged
09:43:17.443879 [notice] 2867 Video - HDMI set
09:43:17.445652 [notice] 2867 Video - No CEA fall back to DMT modes
09:43:17.447094 [notice] 2867 Remote - Shutdown libcec begin
09:43:17.449712 [debug]  2867 Remote - CECLOG: 447 4 unregistering all CEC clients
09:43:17.459480 [debug]  2867 Remote - CECLOG: 457 4 unregistering all CEC clients
09:43:17.461740 [debug]  2867 Remote - CECLOG: 459 4 unregistering all CEC clients
09:43:17.464968 [notice] 2867 Remote - Shutdown libcec end
09:43:17.466602 [notice] 2867 Video - Switch to prefered mode
09:43:17.469592 [notice] 2867 Remote - Probe /dev/input/event0
09:43:17.476495 [notice] 2867 Remote - Add /dev/input/event0 to List
09:43:17.477906 [notice] 2867 Remote - Probe /dev/input/event1
09:43:17.479151 [notice] 2867 Remote - Add /dev/input/event1 to List
09:43:17.482565 [notice] 2867 Remote - Probe /dev/input/event2
09:43:17.483873 [notice] 2867 Remote - Add /dev/input/event2 to List
09:43:17.485070 [notice] 2867 Remote - Probe /dev/input/event3
09:43:17.486678 [notice] 2867 Remote - Add /dev/input/event3 to List
09:43:17.491467 [notice] 2867 Remote - Probe /dev/input/event4
09:43:17.492687 [notice] 2867 Remote - Add /dev/input/event4 to List
09:43:17.501617 [notice] 2867 Remote - Init LibCEC
09:43:17.899902 [notice] 2867 Remote - CEC: No adapter found
09:43:17.903725 [debug]  2867 Video - Init OMX failed 80001009
09:43:17.908043 [EMERG]  2867 Core - Video module failed to initialise
09:43:17.909970 [notice] 2867 Core - BoxStack module shut down
09:43:17.912302 [notice] 2867 Core - Command module shut down
09:43:17.918988 [notice] 2867 Core - VDR module shut down
09:43:17.921435 [notice] 2867 Core - OSD module shut down
09:43:17.923238 [notice] 2867 Core - Audio module shut down
09:43:17.925044 [notice] 2867 Video - Shutdown video module
09:43:17.926418 [debug]  2867 Video - enter deallocatecodecsomx
09:43:17.932153 [debug]  2867 Video - leave deallocate codecs OMX
09:43:17.955791 [notice] 2867 Core - Video module shut down
09:43:17.956262 [debug]  2867 Timers - Timers shutdown start
09:43:17.958927 [debug]  2867 Timers - Timers shutdown end
09:43:17.968377 [notice] 2867 Core - Timers module shut down
09:43:17.970190 [notice] 2867 Core - MTD module shut down
09:43:17.972555 [notice] 2867 Core - LED module shut down
09:43:17.974653 [notice] 2867 Remote - Shutdown libcec begin
09:43:17.978744 [debug]  2867 Remote - CECLOG: 471 4 unregistering all CEC clients
09:43:17.980213 [debug]  2867 Remote - CECLOG: 472 4 unregistering all CEC clients
09:43:17.982484 [debug]  2867 Remote - CECLOG: 475 4 unregistering all CEC clients
09:43:17.984883 [notice] 2867 Remote - Shutdown libcec end
09:43:17.989092 [notice] 2867 Core - Remote module shut down
09:43:17.990451 [notice] 2867 Core - WOL module shut down
09:43:17.999896 [notice] 2867 Core - Sleeptimer module shut down
09:43:18.001632 [notice] 2867 Core - Log module shutting down... bye!

And here I have the tvservice output:

Code Select Expand

tvservice -m CEA
Group CEA has 14 modes:
           mode 1: 640x480 @ 60Hz 4:3, clock:25MHz progressive
           mode 2: 720x480 @ 60Hz 4:3, clock:27MHz progressive
           mode 3: 720x480 @ 60Hz 16:9, clock:27MHz progressive
           mode 4: 1280x720 @ 60Hz 16:9, clock:74MHz progressive
           mode 5: 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced
  (native) mode 16: 1920x1080 @ 60Hz 16:9, clock:148MHz progressive
           mode 17: 720x576 @ 50Hz 4:3, clock:27MHz progressive
           mode 18: 720x576 @ 50Hz 16:9, clock:27MHz progressive
           mode 19: 1280x720 @ 50Hz 16:9, clock:74MHz progressive
           mode 20: 1920x1080 @ 50Hz 16:9, clock:74MHz interlaced
           mode 31: 1920x1080 @ 50Hz 16:9, clock:148MHz progressive
           mode 32: 1920x1080 @ 24Hz 16:9, clock:74MHz progressive
           mode 33: 1920x1080 @ 25Hz 16:9, clock:74MHz progressive
           mode 34: 1920x1080 @ 30Hz 16:9, clock:74MHz progressive

The running vompserver is not the latest version. I hope this is not the reason

Claus

Hi,

with the latest version of the vompclient, I get again a seg fault. But now, I get it also if my TV is connected to hdmi. Here the debug log:

Code Select Expand

18:53:47.216400 [notice] 2435 Core - Startup successful
18:53:47.218336 [notice] 2435 Video - signalOn
18:53:47.220262 [debug]  2435 OSD - shutdown mark1
18:53:47.222887 [debug]  2435 Remote - CECLOG: 1651 16 received data: header:00030002 p0:00011A01 p1:00000000 p2:00000000 p3:00000000 reason:2
18:53:47.226295 [debug]  2435 Remote - CECLOG: 1654 8 >> 01:1a:01
18:53:47.228466 [debug]  2435 Remote - CECLOG: 1657 4 >> TV (0) -> Recorder 1 (1): give deck status (1A)
18:53:47.230655 [debug]  2435 Remote - CECLOG: 1659 4 << Recorder 1 (1) -> TV (0): deck status 'stop'
18:53:47.232800 [debug]  2435 Remote - CECLOG: 1661 8 << 10:1b:1a
18:53:47.236833 [debug]  2435 OSD - shutdown mark2
18:53:47.238824 [debug]  2435 Remote - CECLOG: 1667 16 sending data: len = 2, payload = 10:1B:1A
18:53:47.240868 [debug]  2435 OSD - shutdown mark3
18:53:47.243093 [debug]  2435 OSD - Making egl current out final
18:53:47.258028 [notice] 2435 Video - No CEA modes found abort
18:53:47.259663 [notice] 2435 OSD - OpenGL_ES OpenVG
18:53:47.261411 [notice] 2435 OSD - EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_vg_parent_image EGL_KHR_gl_texture_2D
18:53:47.262989 [notice] 2435 OSD - _image EGL_KHR_gl_texture_cubemap_image EGL_KHR_lock_surface
18:53:47.266020 [notice] 2435 OSD - Displaysize is 1920 x 1080
18:53:47.284023 [debug]  2435 OSD - Making egl current in12435
18:53:47.285605 [notice] 2435 OSD - 1.1
18:53:47.287036 [notice] 2435 OSD - Broadcom
18:53:47.288681 [notice] 2435 OSD - VideoCore IV HW
18:53:47.290217 [notice] 2435 OSD - VG_KHR_EGL_image
18:53:47.331214 [debug]  2435 Remote - CECLOG: 1759 16 received data: header:00030001 p0:001A1B10 p1:00000000 p2:00000000 p3:00000000 reason:1
18:53:47.333800 [debug]  2435 Remote - CECLOG: 1762 16 command transmitted
18:53:47.452595 [debug]  2435 OSD - Making egl current out 12435
18:53:47.454571 [debug]  2435 BoxStack - Update called
18:53:47.456216 [debug]  2435 BoxStack - Locked for update
Segmentation fault


Claus

Hi,

if I reboot my RPI, after reboot the vompclient can not controlled by cec, but if I press a key the TV shows a message to select the cec client that should be controlled. If I now select the the RPI, I even so can not control the vompclient. After I restart the vompclient, every thing is ok.

Claus

PS.: After reboot, the hdmi output is disabled, until the vompclient will started. On shoutdown I see the console 1 and the shutdown log messages.

Hi,

I have found a problem with a local vdr server.
If I connect the vompclient to a local vdr (by using the -s 127.0.0.1) Option, I get the recordings list of my other vdr PC.
OK, this is nice, since I have no recordings on my local vdr, but mainly not that, what I expected

Claus

Hi,

if I use the av output (or don't connect a hdmi device), I get a segmentation fault on vompclient start:

Code Select Expand

MLD> vompclient -s 127.0.0.1 -d
19:23:37.709310 [info]   2393 Core - Starting up...
19:23:37.712131 [info]   2393 Core - Signal handlers set up successfully
19:23:37.713999 [EMERG]  2393 Core - Could not retrieve free virtual console, please change permissions
19:23:37.720040 [notice] 2393 Remote - Init LibCEC
19:23:37.903586 [debug]  2393 Remote - CECLOG: 127 4 unregistering all CEC clients
19:23:37.906977 [debug]  2393 Remote - CECLOG: 131 16 Broadcast (F): osd name set to 'Broadcast'
19:23:37.909537 [debug]  2393 Remote - CECLOG: 133 16 InitHostCEC - vchiq_initialise succeeded
19:23:37.911406 [debug]  2393 Remote - CECLOG: 135 16 InitHostCEC - vchi_initialise succeeded
19:23:37.913336 [debug]  2393 Remote - CECLOG: 137 16 InitHostCEC - vchi_connect succeeded
19:23:37.915931 [debug]  2393 Remote - CECLOG: 140 16 received data: header:00060040 p0:0000000F p1:0000FFFF p2:00000000 p3:00000000 reason:40
19:23:37.917748 [debug]  2393 Remote - CECLOG: 142 16 logical address changed to Broadcast (f)
19:23:37.920117 [debug]  2393 Remote - CECLOG: 144 16 RegisterLogicalAddress - registering address e
19:23:37.922600 [debug]  2393 Remote - CECLOG: 146 1 RegisterLogicalAddress - vc_cec_set_logical_address(E) returned invalid arg (8)
19:23:37.924401 [debug]  2393 Remote - CECLOG: 148 1 Open - vc_cec could not be initialised
19:23:37.926214 [debug]  2393 Remote - CECLOG: 150 4 connection opened
19:23:37.929749 [debug]  2393 Remote - CECLOG: 153 4 << Broadcast (F) -> TV (0): POLL
19:23:37.931829 [debug]  2393 Remote - CECLOG: 156 16 initiator 'Broadcast' is not supported by the CEC adapter. using 'Free use' instead
19:23:37.933987 [debug]  2393 Remote - CECLOG: 158 8 << e0
19:23:37.936079 [debug]  2393 Remote - CECLOG: 160 16 >> POLL not sent
19:23:37.937834 [debug]  2393 Remote - CECLOG: 159 16 processor thread started
19:23:37.940340 [debug]  2393 Remote - CECLOG: 164 4 registering new CEC client - v1.9.0
19:23:37.942335 [debug]  2393 Remote - CECLOG: 166 16 detecting logical address for type 'recording device'
19:23:37.944254 [debug]  2393 Remote - CECLOG: 168 16 trying logical address 'Recorder 1'
19:23:37.946004 [debug]  2393 Remote - CECLOG: 170 4 << Recorder 1 (1) -> Recorder 1 (1): POLL
19:23:37.947708 [debug]  2393 Remote - CECLOG: 172 8 << 11
19:23:37.949592 [debug]  2393 Remote - CECLOG: 173 16 >> POLL not sent
19:23:37.951455 [debug]  2393 Remote - CECLOG: 175 4 using logical address 'Recorder 1'
19:23:37.953505 [debug]  2393 Remote - CECLOG: 177 16 Recorder 1 (1): device status changed into 'handled by libCEC'
19:23:37.955086 [debug]  2393 Remote - CECLOG: 179 16 Recorder 1 (1): power status changed from 'unknown' to 'on'
19:23:37.957217 [debug]  2393 Remote - CECLOG: 181 16 Recorder 1 (1): CEC version 1.4
19:23:37.958963 [debug]  2393 Remote - CECLOG: 183 16 AllocateLogicalAddresses - device '0', type 'recording device', LA '1'
19:23:37.961086 [debug]  2393 Remote - CECLOG: 185 16 RegisterLogicalAddress - registering address 1
19:23:37.963166 [debug]  2393 Remote - CECLOG: 187 1 RegisterLogicalAddress - vc_cec_set_logical_address(1) returned invalid arg (8)
19:23:37.964644 [debug]  2393 Remote - CECLOG: 188 16 Recorder 1 (1): osd name set to 'vomp'
19:23:37.966351 [debug]  2393 Remote - CECLOG: 190 16 Recorder 1 (1): menu language set to 'eng'
19:23:37.968106 [debug]  2393 Remote - CECLOG: 192 16 SetDevicePhysicalAddress - not setting invalid physical address ffff
19:23:37.969911 [debug]  2393 Remote - CECLOG: 194 4 setting HDMI port to 1 on device TV (0)
19:23:37.971652 [debug]  2393 Remote - CECLOG: 195 16 Recorder 1 (1): physical address changed from ffff to 1000
19:23:37.973132 [debug]  2393 Remote - CECLOG: 197 4 << Recorder 1 (1) -> broadcast (F): physical adddress 1000
19:23:37.974818 [debug]  2393 Remote - CECLOG: 199 8 << 1f:84:10:00:01
19:23:37.976825 [debug]  2393 Remote - CECLOG: 201 8 << 1f:84:10:00:01
19:23:37.978718 [debug]  2393 Remote - CECLOG: 203 16 making Recorder 1 (1) the active source
19:23:37.981081 [debug]  2393 Remote - CECLOG: 205 4 >> source activated: Recorder 1 (1)
19:23:37.983106 [debug]  2393 Remote - CECLOG: 207 16 scheduling active source message for 'Recorder 1'
19:23:37.985233 [debug]  2393 Remote - CECLOG: 209 4 CEC client registered: libCEC version = 1.9.0, client version = 1.9.0, firmware version = 1, log
19:23:37.987421 [debug]  2393 Remote - CECLOG: 211 16 Recorder 1 (1) was already marked as active source
19:23:37.989481 [debug]  2393 Remote - CECLOG: 213 16 sending active source message for 'Recorder 1'
19:23:37.991612 [debug]  2393 Remote - CECLOG: 215 8 << 10:04
19:23:37.993384 [debug]  2393 Remote - CECLOG: 217 8 << 10:04
19:23:37.995303 [debug]  2393 Remote - CECLOG: 219 16 failed to make 'Recorder 1' the active source. will retry later
19:23:37.997122 [ERR]    2393 Remote - CEC:Failed set active source
19:23:37.998737 [info]   2393 Core - Remote module initialised
19:23:38.000828 [info]   2393 Core - LED module initialised
19:23:38.002220 [info]   2393 Core - Mtd module initialised
19:23:38.004304 [info]   2393 Core - Timers module initialised
19:23:38.006008 [info]   2393 Core - Read from MTD: PAL 720x576
19:23:38.007785 [debug]  2393 Video - Setting aspect to 0
19:23:38.010181 [notice] 2393 Video - No CEA modes found abort
19:23:38.011749 [info]   2393 Core - Video module initialised
19:23:38.014859 [notice] 2393 OSD - OpenGL_ES OpenVG
19:23:38.016630 [notice] 2393 OSD - EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_vg_parent_image EGL_KHR_gl_texture_2D
19:23:38.018066 [notice] 2393 OSD - _image EGL_KHR_gl_texture_cubemap_image EGL_KHR_lock_surface
19:23:38.021535 [notice] 2393 OSD - Displaysize is 720 x 576
19:23:38.034706 [debug]  2393 OSD - Making egl current in12393
19:23:38.036385 [notice] 2393 OSD - 1.1
19:23:38.038103 [notice] 2393 OSD - Broadcom
19:23:38.039892 [notice] 2393 OSD - VideoCore IV HW
19:23:38.041615 [notice] 2393 OSD - VG_KHR_EGL_image
19:23:38.193929 [debug]  2393 OSD - Making egl current out 12393
19:23:38.208243 [info]   2393 Core - OSD module initialised
19:23:38.211268 [debug]  2393 Audio - MUTE OFF OFF OFF
19:23:38.216808 [info]   2393 Core - Audio module initialised
19:23:38.218415 [info]   2393 Core - VDR module initialised
19:23:38.220309 [info]   2393 Core - BoxStack module initialised
19:23:38.222706 [info]   2393 Core - Command module initialised
19:23:38.225111 [notice] 2393 Core - Startup successful
19:23:38.226977 [debug]  2393 OSD - shutdown mark1
19:23:38.230332 [debug]  2393 OSD - shutdown mark2
19:23:38.232123 [debug]  2393 OSD - shutdown mark3
19:23:38.233800 [notice] 2393 Video - Shutdown video module
19:23:38.235525 [debug]  2393 Video - enter deallocatecodecsomx
19:23:38.237349 [debug]  2393 Video - leave deallocate codecs OMX
19:23:38.268639 [debug]  2393 OSD - Making egl current out final
19:23:38.288397 [notice] 2393 Video - No CEA modes found abort
19:23:38.290089 [notice] 2393 OSD - OpenGL_ES OpenVG
19:23:38.291773 [notice] 2393 OSD - EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_vg_parent_image EGL_KHR_gl_texture_2D
19:23:38.293424 [notice] 2393 OSD - _image EGL_KHR_gl_texture_cubemap_image EGL_KHR_lock_surface
19:23:38.296073 [notice] 2393 OSD - Displaysize is 720 x 576
19:23:38.314340 [debug]  2393 OSD - Making egl current in12393
19:23:38.315930 [notice] 2393 OSD - 1.1
19:23:38.317515 [notice] 2393 OSD - Broadcom
19:23:38.319370 [notice] 2393 OSD - VideoCore IV HW
19:23:38.321030 [notice] 2393 OSD - VG_KHR_EGL_image
19:23:38.463342 [debug]  2393 OSD - Making egl current out 12393
19:23:38.465920 [debug]  2393 BoxStack - Update called
19:23:38.467869 [debug]  2393 BoxStack - Locked for update
Segmentation fault

Du you have any ideas or have test this yourself?

Claus

Hi,

since I use the latest firmware, and vc libs, I get this error message:

Code Select Expand

20:23:13.561775 [info]   2702 Core - Starting up...
20:23:13.564580 [info]   2702 Core - Signal handlers set up successfully
20:23:13.566692 [EMERG]  2702 Core - Could not retrieve free virtual console, please change permissions
20:23:13.572944 [notice] 2702 Remote - Init LibCEC
* failed to open vchiq instance
If I look in the firmware and kernel change log, I see, that there a lot of changes to the vchiq.
Do you also has this problem with the latest version or do you know a solution?

Claus

Hi,

most time, but not every, if I select one of the dvb-t NDR channels, I get only a black screen. Some times I get this also on some other channels, but the most time only on the NDR channels. The audio is every time OK. If I switch mutiple times to the same channel, every 10. I get also the video.
I use a local running VDR.
Do you have any idea?

Claus

Hi,

there is a problem with EPG data that contains UTF-8 characters. If it contains e.g. a German Umlaut, the EPG text will be cut at this character. Do you know about this, and is there a solution?
Must I set especial environment variables to fix this?

Claus

Hi,

if I have problems with my dvb-t reception, sometimes the vompclient hang and it is not possible to restart it. Do you know about this. If not, do you think it will helps to fix it, if I can make a short record of such a stream for you?

Claus

Hi,

is it easy possible, to show on the menu screen a small versions info. It's only for development, so that I simply can ask the customers, witch version they are running. I will prefer, if I can set this string by a command line option, or better by environment variable at compile time, so that I can add the package versions number.

Claus

Hi,

at the actual version of the vompclinet it is necessary to set up the hdmi_mode in the config.txt file. Otherwise the TV disconected from the RPI ( "no signal" message will be shown) if a TV stream starts.
It seems, that older versions of the vompclient don't has this problem. Also if I stop the vompclient (actual version), most times the TV shows the "no signal" message or switch to a other program.
Do you have any idea, what is the reason for this. Especially the first problem is bad, because than no video will be shown, until a working configuration was found, and this differed for several TVs, so that I can not setup a default value.

Claus

Hi,

the volume control don't work. It is possible to change the volume setting by keyboard, but this has no effect for the volume. Also a change of the volume by the alsamixer has no effect.

Claus

Hi,

is it possible to view a selected TV channel at startup (like the vdr do)?

Claus

Hi,

does there is lirc support in the vompclient, or do you think, that it is a big think to add it? Or is it alternatively possible to add support for reading the keyboard input from stdin instead of from /dev/input/event*? Or is there a way to control the vompclient via something like the svdrpsend? Or do you know an other way, how I can use a lirc remote control to control the vompclient?

Claus

Hi,

with the latest version of the vompclient (version 76aef7237b9a2f465e4d3d7ef4250eb7a087866c), the vompclient and than also the RPI crash short time after starting TV replay. If I select a SD-TV channel, the system crash after a view second and the vomp client shows the message "Connection lost". On HD channels only the keyboard connection lost after a view seconds. In both cases the keyboard LED flashes up before the system crash and I see some short video interrupts.
With a older Version of the vompclient I have not had this problems (no crashes). Yesterday I have also added my mpeg2 license key.

Do you have any ideas?

Claus

Hi,

I have found on http://code.google.com/p/mediastuff/wiki/VompVdrProtocol a description for a modification that make it possible to detect a vomp server automatically, also if it is running on the same machine as the client.
Did you think, that it is possible to add this modification to the vomp client? The reason is, that I run the vomp server also on the RPI.

Claus

Hi,

where must I store the background images, so that the vomp-client can find and load them?

Claus

Hi,

I have a problem with the vompclient-raspi. It can not connect to the VDR because there are two connections at the same time at login time.
The Problem is the line 651 in vdr.cc
setCharset(Osd::getInstance()->charSet());
This will be called until the login procedure is running. If I comment this line out, the connection to the VDR runns well.

Claus