Print Page - Scart RGB dark problem

Title: Scart RGB dark problem
Post by: stu-e on January 18, 2007, 09:17:59

Anyone suffering from unusually dark scart RGB output see this thread for a simple hardware fix:
http://www.hauppauge.co.uk/board/showthread.php?t=6539 (http://www.hauppauge.co.uk/board/showthread.php?t=6539)

Title: Re: Scart RGB dark problem
Post by: davep on January 18, 2007, 16:56:16

Interesting. I have the same problem with my D3A board, and need to turn the TV contrast to maximum to get a watchable picture.

Can you confirm that the resistors are R110, R111 and R112 on the underside of the board?

Dave

Title: Re: Scart RGB dark problem
Post by: stu-e on January 19, 2007, 09:06:53

I'll check tonight

Title: Re: Scart RGB dark problem
Post by: davep on January 19, 2007, 12:02:22

That's OK, I traced the connections from the SCART and confirmed that those are indeed the right resistors. Then I nixed* them. Result - a much better picture, just needs the brightness turning up slightly on the set to be perfect.

Many thanks for the suggestion.

Dave

* Gripped each resistor in turn with a fine pair of round-nose pliers, then pulled. The body of the component broke away leaving the terminations behind. Repeat at your own risk!!

Loggytronic Forum

VOMP => VOMP General / MVP => Topic started by: stu-e on January 18, 2007, 09:17:59