Print Page - Vomp Client Terminates - Caused by "Power After Boot = OFF" ????

Title: Vomp Client Terminates - Caused by "Power After Boot = OFF" ????
Post by: sun on February 10, 2008, 19:57:59

Hi,

looks like I messed up my VompClient. When I start it, it connects with the server, reads the settings and terminates.

Beside upgrading PowerDVD from Version 5 to 6, I've played kind of with the settings and it looks like I found one which causes the VompClient to terminate right after connecting with the vomp server. So my guess is, that the current problem has nothing to to with the PowerDVD upgrade.

Code Select

20:12:43.000718 [debug]  VConnect - Draw done
20:12:43.000718 [debug]  Command - processing message 11
20:12:43.000718 [debug]  Boxx - Destruct, now 2
20:12:43.000734 [debug]  Boxx - Destruct, now 1
20:12:43.000734 [debug]  Boxx - Construct, now 2
20:12:43.000734 [debug]  Boxx - Construct, now 3
20:12:43.000734 [debug]  TBBoxx - Draw
20:12:43.000734 [debug]  Command - Phew, no dangerous on-the-fly mode switching to do!
20:12:43.000734 [debug]  Command - Load power after boot
20:12:43.000750 [info]   Command - Config says Power After Boot = Off
20:12:43.000750 [debug]  Boxx - Destruct, now 2
20:12:43.000750 [debug]  Boxx - Destruct, now 1
20:12:43.000765 [debug]  TCP - Have closed
20:12:43.000765 [debug]  VDR - Disconnect
20:12:45.000156 [debug]  UDP - Wait for packet
20:12:45.000156 [debug]  Command - processing message 28
20:12:45.000171 [notice] Core - BoxStack module shut down
20:12:45.000171 [notice] Core - Command module shut down
20:12:45.000171 [debug]  VDR - Disconnect

Any idea where the settings get stored and how getting them back to default?

Thanks a lot,

sun

Title: Re: Vomp Client Terminates - Caused by "Power After Boot = OFF" ????
Post by: sun on February 10, 2008, 22:33:49

Gefunden.

Es lag am spielen mit den Settings.

Die config liegt auf dem Server.
/var/lib/vdr/plugins/vomp-*.conf

Power After Boot wieder auf "On" geändert und schon geht es wieder.

sun

Title: Re: Vomp Client Terminates - Caused by "Power After Boot = OFF" ????
Post by: Harry on February 11, 2008, 07:33:30

hi,

your last post might be helpful for non-german folks
if it was in english :)

cheers
Harry

Title: Re: Vomp Client Terminates - Caused by "Power After Boot = OFF" ????
Post by: torsten on February 11, 2008, 12:16:40

Hi,

sun has edited the config settings by hand and switched the "Power After Boot" option back to its default value yes.

Probably it would be better to disregard this setting in the Vomp for Windows client.

Torsten

Title: Re: Vomp Client Terminates - Caused by "Power After Boot = OFF" ????
Post by: sun on February 11, 2008, 16:06:29

Thanks Torsten for the translation.

My appologize Harry for having made my comment about how to solve this in german.

Loggytronic Forum

VOMP => Vomp For Windows => Topic started by: sun on February 10, 2008, 19:57:59