Hello,
i use Mahlzeit VDR and now i want to install VOMP Server Plugin to stream to my MediaMVP Version H3.
i have use the setup to install the plugin but until now nothing work. The MediaMVP cant find a Server.
What should i do ?
greats Axel
Hi, first check the logs to make sure that your vdr is loading the vompserver plugin you have installed. If that is working then check your firewall - the mvp needs to contact the server on port 3024, both UDP and TCP.
thanks for the quick answer. How can i check the logs ? where did the files saved ?
Greets Axel
Hello,
my logfile :
linvdr:~# logread
Dec 28 15:18:57 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Dec 28 15:18:57 linvdr user.info kernel: 8139too Fast Ethernet driver 0.9.27
Dec 28 15:18:57 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Dec 28 15:18:57 linvdr user.debug kernel: PCI: setting IRQ 10 as level-triggered
Dec 28 15:18:57 linvdr user.info kernel: GSI 10 (level, low) -> IRQ 10
Dec 28 15:18:57 linvdr user.info kernel: eth0: RealTek RTL8139 at 0xd097e000, 00:a1:b0:a2:df:8f, IRQ 10
Dec 28 15:18:57 linvdr user.debug kernel: eth0: Identified 8139 chip type 'RTL-8139B'
Dec 28 15:18:57 linvdr local0.info udhcpc[1243]: udhcpc (v0.9.9-pre) started
Dec 28 15:18:57 linvdr user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Dec 28 15:18:57 linvdr local0.debug udhcpc[1243]: Sending discover...
Dec 28 15:18:57 linvdr user.info kernel: Linux video capture interface: v2.00
Dec 28 15:18:57 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Dec 28 15:18:57 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
Dec 28 15:18:57 linvdr user.debug kernel: PCI: setting IRQ 5 as level-triggered
Dec 28 15:18:57 linvdr user.info kernel: GSI 5 (level, low) -> IRQ 5
Dec 28 15:18:57 linvdr user.warn kernel: found saa7146 @ mem d0b62000 (revision 1, irq 5) (0x13c2,0x000a).
Dec 28 15:18:57 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X).
Dec 28 15:18:58 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:04:4a:31
Dec 28 15:18:58 linvdr local0.debug udhcpc[1243]: Sending select for 192.168.178.24...
Dec 28 15:18:58 linvdr local0.info udhcpc[1243]: Lease of 192.168.178.24 obtained, lease time 864000
Dec 28 15:18:58 linvdr auth.info sshd[1315]: Server listening on 0.0.0.0 port 22.
Dec 28 15:18:58 linvdr daemon.info init: ^MStarting pid 1325, console /dev/tty1: '/sbin/getty'
Dec 28 15:18:58 linvdr daemon.info init: ^MStarting pid 1326, console /dev/tty2: '/sbin/getty'
Dec 28 15:18:58 linvdr daemon.info init: ^MStarting pid 1328, console /dev/tty3: '/sbin/getty'
Dec 28 15:18:58 linvdr daemon.info init: ^MStarting pid 1330, console /dev/tty4: '/sbin/getty'
Dec 28 15:18:59 linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
Dec 28 15:18:59 linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Dec 28 15:18:59 linvdr user.warn kernel: dvb-ttpci: DVB-C analog module @ card 0 detected, initializing MSP3415
Dec 28 15:19:00 linvdr user.warn kernel: saa7113 not accessible.
Dec 28 15:19:00 linvdr user.warn kernel: saa7146 (0): registered device video0 [v4l2]
Dec 28 15:19:00 linvdr user.warn kernel: saa7146 (0): registered device vbi0 [v4l2]
Dec 28 15:19:00 linvdr user.warn kernel: DVB: registering frontend 0 (ST STV0297 DVB-C)...
Dec 28 15:19:00 linvdr user.info kernel: input: DVB on-card IR receiver as /class/input/input2
Dec 28 15:19:00 linvdr user.info kernel: dvb-ttpci: found av7110-0.
Dec 28 15:19:00 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Dec 28 15:19:00 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Dec 28 15:19:00 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
Dec 28 15:19:00 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Dec 28 15:19:00 linvdr user.info kernel: flexcop-pci: will use the HW PID filter.
Dec 28 15:19:00 linvdr user.info kernel: flexcop-pci: card revision 2
Dec 28 15:19:00 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Dec 28 15:19:00 linvdr user.debug kernel: PCI: setting IRQ 11 as level-triggered
Dec 28 15:19:00 linvdr user.info kernel: GSI 11 (level, low) -> IRQ 11
Dec 28 15:19:00 linvdr user.warn kernel: DVB: registering new adapter (FlexCop Digital TV device).
Dec 28 15:19:00 linvdr user.info kernel: b2c2-flexcop: MAC address = 00:d0:d7:0d:e1:97
Dec 28 15:19:00 linvdr user.err kernel: b2c2-flexcop: i2c master_xfer failed
Dec 28 15:19:00 linvdr user.err kernel: b2c2-flexcop: i2c master_xfer failed
Dec 28 15:19:00 linvdr user.info kernel: b2c2-flexcop: found the mt352 at i2c address: 0x0f
Dec 28 15:19:00 linvdr user.warn kernel: DVB: registering frontend 1 (Zarlink MT352 DVB-T)...
Dec 28 15:19:00 linvdr user.info kernel: b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Dec 28 15:19:00 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Dec 28 15:19:00 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Dec 28 15:19:01 linvdr user.info kernel: lirc_serial: auto-detected active high receiver
Dec 28 15:19:01 linvdr user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Dec 28 15:19:02 linvdr user.info vdr: [1400] VDR version 1.4.4-2-Toxic-Ed. started
Dec 28 15:19:02 linvdr user.info vdr: [1400] Bigpatch 17.09.2006 is active!
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-dvdconvert.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-image.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-pcd.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-streamdev-server.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-tvtv.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-vompserver.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-weatherng.so.1.4.5
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-wirbelscan.so.1.4.5
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-burn.so.1.4.5
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/setup.conf
Dec 28 15:19:03 linvdr user.err vdr: [1400] ERROR: unknown config parameter: RecordDolbyDigital = 1
Dec 28 15:19:03 linvdr user.err vdr: [1400] ERROR: unknown config parameter: ShowProgressBar = 0
Dec 28 15:19:03 linvdr user.err vdr: [1400] ERROR: unknown config parameter: SortTimers = 1
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/sources.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/diseqc.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/channels.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/timers.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/commands.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/reccmds.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/svdrphosts.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/remote.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/keymacros.conf
Dec 28 15:19:03 linvdr user.debug vdr: [1407] video directory scanner thread started (pid=1407, tid=1407)
Dec 28 15:19:03 linvdr user.debug vdr: [1408] video directory scanner thread started (pid=1408, tid=1408)
Dec 28 15:19:03 linvdr user.debug vdr: [1400] reading EPG data from /video0/epg.data
Dec 28 15:19:03 linvdr user.debug vdr: [1400] probing /dev/dvb/adapter0/frontend0
Dec 28 15:19:04 linvdr user.debug vdr: [1407] video directory scanner thread ended (pid=1407, tid=1407)
Dec 28 15:19:04 linvdr user.debug vdr: [1408] video directory scanner thread ended (pid=1408, tid=1408)
Dec 28 15:19:05 linvdr user.debug vdr: [1410] tuner on device 1 thread started (pid=1410, tid=1410)
Dec 28 15:19:05 linvdr user.debug vdr: [1411] section handler thread started (pid=1411, tid=1411)
Dec 28 15:19:05 linvdr user.debug vdr: [1400] probing /dev/dvb/adapter1/frontend0
Dec 28 15:19:05 linvdr user.debug vdr: [1400] probing /dev/dvb/adapter2/frontend0
Dec 28 15:19:05 linvdr user.info vdr: [1400] found 2 video devices
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: dvd (0.3.6-b03): turn VDR into an (almost) full featured DVD player
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: dvdconvert (0.2.5): Plugin for dvdconvert with dvd2vdr dvd2dvd
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: image (0.2.6): A Image Viewer plugin
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: mp3 (0.9.15): A versatile audio player
Dec 28 15:19:05 linvdr user.debug vdr: [1413] tuner on device 2 thread started (pid=1413, tid=1413)
Dec 28 15:19:05 linvdr user.debug vdr: [1414] section handler thread started (pid=1414, tid=1414)
Dec 28 15:19:05 linvdr user.info vdr: [1400] loading /etc/vdr/plugins/mp3sources.conf
Dec 28 15:19:05 linvdr user.err vdr: [1400] WARNING: source base /dev/cdrom expands to /dev/hdb
Dec 28 15:19:05 linvdr user.err vdr: [1400] WARNING: source base /dev/hdb is not a directory
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: osdteletext (0.5.1): Displays teletext on the OSD
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: pcd (0.0.3): PhotoCD Player
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: streamdev-server (0.3.3-pre3-geni): VDR Streaming Server
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: tvonscreen (0.7.1): Shows the EPG info in form of a typical TV magazine
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: tvtv (0.3.1): TVTV Timers update
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: vcd (0.7): VideoCD Player
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: vompserver (0.2.5): VDR on MVP plugin by Chris Tallon
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: weatherng (0.0.8-pre3): Weather.com: Weather forecast
Dec 28 15:19:05 linvdr user.err vdr: [1400] weatherng: Parameter '-D' not set. Set default value : /etc/vdr/plugins/weatherng
Dec 28 15:19:05 linvdr user.err vdr: [1400] weatherng: Parameter '-I' not set. Set default value : /etc/vdr/plugins/weatherng
Dec 28 15:19:05 linvdr user.err vdr: [1400] weatherng: Parameter '-S' not set. Set default value : /etc/vdr/plugins/weatherng
Dec 28 15:19:05 linvdr user.debug vdr: [1400] DEBUG : weatherng: defined HAVE_IMLIB2
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: wirbelscan (0.0.2): dvb c/t/s/analog scan
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: burn (0.0.009): Versatile convert-and-burn plugin
Dec 28 15:19:05 linvdr user.info vdr: [1400] setting primary device to 1
Dec 28 15:19:05 linvdr user.info vdr: [1400] SVDRP listening on port 2001
Dec 28 15:19:05 linvdr user.info vdr: [1400] setting current skin to "classic"
Dec 28 15:19:05 linvdr user.info vdr: [1400] loading /etc/vdr/themes/classic-default.theme
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: dvd
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: dvdconvert
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: image
Dec 28 15:19:05 linvdr user.info vdr: [1400] loading /etc/vdr/plugins/imagesources.conf
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: mp3
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: osdteletext
Dec 28 15:19:05 linvdr user.err vdr: [1400] osdteletext: no translation found for 'Play' in language 1 (Deutsch)
Dec 28 15:19:05 linvdr user.err vdr: [1400] osdteletext: no translation found for 'FastFwd' in language 1 (Deutsch)
Dec 28 15:19:05 linvdr user.err vdr: [1400] osdteletext: no translation found for 'FastRew' in language 1 (Deutsch)
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: pcd
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: streamdev-server
Dec 28 15:19:05 linvdr user.info vdr: [1400] loading /etc/vdr/plugins/streamdevhosts.conf
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: tvonscreen
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: tvtv
Dec 28 15:19:05 linvdr user.err vdr: [1400] TVTV: Error reading '/etc/vdr/plugins/tvtv_channelmap.conf'!
Dec 28 15:19:05 linvdr user.debug vdr: [1400] TVTV: Packed String: 1O4XBDRtc13hWaMbesyBkg==
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: vcd
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: vompserver
Dec 28 15:19:05 linvdr user.debug vdr: [1400] VOMP: Config file found
Dec 28 15:19:05 linvdr user.debug vdr: [1400] VOMP: Logging disabled
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: weatherng
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: wirbelscan
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: burn
Dec 28 15:19:05 linvdr user.debug vdr: [1400] remote control LIRC - keys known
Dec 28 15:19:05 linvdr user.debug vdr: [1400] remote control KBD - keys known
Dec 28 15:19:05 linvdr user.debug vdr: [1415] streamdev server thread started (pid=1415, tid=1415)
Dec 28 15:19:05 linvdr user.info vdr: [1415] Streamdev: Listening (VTP) on port 2004
Dec 28 15:19:05 linvdr user.info vdr: [1415] Streamdev: Listening (HTTP) on port 3000
Dec 28 15:19:05 linvdr user.debug vdr: [1418] LIRC remote control thread started (pid=1418, tid=1418)
Dec 28 15:19:05 linvdr user.debug vdr: [1419] KBD remote control thread started (pid=1419, tid=1419)
Dec 28 15:19:09 linvdr user.info vdr: [1410] CAM: AlphaCrypt Light, 01, 4A20, 4A20
Dec 28 15:19:09 linvdr user.info vdr: [1400] switching to channel 13
Dec 28 15:19:09 linvdr user.debug vdr: [1400] creating directory /vtx/T-8468-5633-130
Dec 28 15:19:09 linvdr user.debug vdr: [1400] setting watchdog timer to 900 seconds
Dec 28 15:19:09 linvdr user.debug vdr: [1420] transfer thread started (pid=1420, tid=1420)
Dec 28 15:19:09 linvdr user.debug vdr: [1421] receiver on device 2 thread started (pid=1421, tid=1421)
Dec 28 15:19:09 linvdr user.debug vdr: [1423] TS buffer on device 2 thread started (pid=1423, tid=1423)
Dec 28 15:19:10 linvdr user.debug vdr: [1420] setting audio track to 1 (0)
Dec 28 15:19:19 linvdr user.debug vdr: [1400] max. latency time 1 seconds
Dec 28 15:19:30 linvdr cron.notice crond[1435]: crond 2.3.2 dillon, started, log level 8
Dec 28 15:19:33 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2167 - accepted
Dec 28 15:19:33 linvdr user.err vdr: [1400] dvdconvert: no translation found for 'Plugin for dvdconvert with dvd2vdr dvd2dvd' in language 1 (Deutsch)
Dec 28 15:19:33 linvdr user.err vdr: [1400] tvonscreen: no translation found for 'Shows the EPG info in form of a typical TV magazine' in language 1 (Deutsch)
Dec 28 15:19:43 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:43 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2168 - accepted
Dec 28 15:19:44 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:52 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2169 - accepted
Dec 28 15:19:52 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:53 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2170 - accepted
Dec 28 15:19:53 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:53 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2171 - accepted
Dec 28 15:19:53 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:59 linvdr auth.info sshd[1521]: Accepted password for root from 192.168.178.20 port 1744 ssh2
Dec 28 15:19:59 linvdr auth.info PAM_unix[1521]: (ssh) session opened for user root by (uid=0)
Dec 28 15:19:59 linvdr auth.err PAM-env[1521]: Unable to open config file: No such file or directory
Dec 28 15:19:59 linvdr auth.err PAM-env[1522]: Unable to open config file: No such file or directory
Dec 28 15:20:01 linvdr cron.notice crond[1435]: USER root pid 1524 cmd convert.pl -q -s
Dec 28 15:20:44 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2172 - accepted
Dec 28 15:20:44 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:22:06 linvdr auth.info sshd[1569]: Accepted password for root from 192.168.178.20 port 1756 ssh2
Dec 28 15:22:06 linvdr auth.info sshd[1569]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Dec 28 15:22:06 linvdr auth.info PAM_unix[1569]: (ssh) session opened for user root by (uid=0)
Dec 28 15:22:06 linvdr auth.err PAM-env[1569]: Unable to open config file: No such file or directory
Dec 28 15:22:06 linvdr auth.info sshd[1570]: lastlog_write_filemode: Error writing to /var/log/lastlog: No space left on device
Dec 28 15:22:06 linvdr auth.err PAM-env[1570]: Unable to open config file: No such file or directory
Dec 28 15:25:01 linvdr cron.notice crond[1435]: USER root pid 1732 cmd convert.pl -q -s
Dec 28 15:25:39 linvdr auth.info PAM_unix[1569]: (ssh) session closed for user root
Dec 28 15:25:39 linvdr auth.err sshd[1569]: PAM pam_putenv: delete non-existent entry; MAIL
Dec 28 15:25:39 linvdr auth.err PAM-env[1569]: Unable to open config file: No such file or directory
Dec 28 15:25:55 linvdr auth.info sshd[1748]: Accepted password for root from 192.168.178.20 port 1809 ssh2
Dec 28 15:25:55 linvdr auth.info sshd[1748]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Dec 28 15:25:55 linvdr auth.info PAM_unix[1748]: (ssh) session opened for user root by (uid=0)
Dec 28 15:25:55 linvdr auth.err PAM-env[1748]: Unable to open config file: No such file or directory
Dec 28 15:25:55 linvdr auth.info sshd[1754]: lastlog_write_filemode: Error writing to /var/log/lastlog: No space left on device
Dec 28 15:25:55 linvdr auth.err PAM-env[1754]: Unable to open config file: No such file or directory
linvdr:~#
is anything wrong ?
greets
Axel
From the log it looks like vompserver is starting ok. What about the firewall?
in my AVM Fritzbox Router i make a portforwarding so it should be work, but i doesnt work. I in an other Forum i read someting about MAC Adresse and TFTP Server and MVPLoader ?
Have i install anyting else ?
hi Axel,
it would be helpful if you told us about your network setup.
if you'd like me to supprt you in german, just drop a PM.
cheers
Harry
Hello,
is there anything i have to configurate after install the plugin by using the setup-menu from my vdr ?
greets
Axel
Well, I don't know about MahlZeit, but with "normal" VDR you must tell vompserver which MVPs are allowed to contact (plugin config -directory with MAC-address.conf -file.
And then you'll have to tell vompserver if it's working as tftpd server etc.
With MVPs rev H4 (& H3?) you'll have to do some extra tricks to make MVP to accept your firmware.
You'll have to give more information about your hardware and network -setup to get a proper advice or even "an educated guess".
Hello,
i hope i give you all the detail information you need.
On my VDR i install the Distribution Mahlzeit. All my Computers are connected over the DSL Router Fritzbox with DHCP.
Where can i configurate the MAC Adresse and anything else ?
Greets
Axel
hi,
i've taken a look at Alex's vdr setup.
his MVP is a H3 ...
bootp & tftp are activated in vomp.conf - files, dirs are set correctly.
his DHCP server normally is a fritz box which is unable to provide
proper dhcp settings. so, for a test, we deactivated the fritz dhcp server
and let vompserver handle bootp and tftp:
21:35:25.992969 [info] Main - Logging started
21:35:25.993318 [debug] UDP - UDP replier started
21:35:25.993574 [debug] BOOTPD - Starting bootpd
21:35:25.993709 [debug] BOOTPD - Bootp replier started
21:35:25.993881 [info] Main - TFTP path '/tftpboot/'
21:35:25.993919 [debug] Tftpd - Starting TFTPd
21:35:25.994048 [debug] Tftpd - TFTP server started with base path '/tftpboot/'
21:35:25.994166 [debug] Main - MVPServer run success
21:35:25.995257 [debug] BOOTPD - Starting wait
21:35:25.995339 [debug] Tftpd - Starting wait
21:36:43.365680 [debug] BOOTPD - Wait finished
21:36:43.365855 [debug] BOOTPD - Got request
21:36:43.366192 [debug] Config - Opened config file: /etc/vdr/plugins/vomp-00-0D-FE-[deleted].conf
21:36:43.366238 [debug] BOOTPD - Opened config file: /etc/vdr/plugins/vomp-00-0D-FE-[deleted].conf
21:36:43.366437 [debug] BOOTPD - Found IP 192.168.178.25 for MVP
21:36:43.366561 [debug] BOOTPD - Will enforce IP 192.168.178.25 on MVP even if it already has another
21:36:43.366601 [debug] BOOTPD - Giving MVP IP from config
21:36:43.366908 [debug] BOOTPD - Starting wait
there obvisously are issues with the H3. i'll have to read my way through
the H3 issues :(
cheers
I had quite similar problems with my H4 mvp.
I can't remember where I found correct file, but my mvp didn't get dongle.bin, because I didn't have dongle.bin.ver -file (it didn't exist).
After correct dongle.bin.ver was installed, it started working (and still is) like charm.
thx 4 your feedback.
hmm.
shouldn't the TFTP download show up in the logfile?
anyway... i'm planning to install isc-dhcpd on Axel's VDR.
cheers
Harry
What does mvp show?
Does it seem to start download?
Mine did, and then freezed... dongle.bin.ver was the answer then.
no, the dongle apparently never loads.
but then again, i've never used the built-in TFTP
server. i only assumed it would log any TFTP downloads.
[edit]
this is getting somewhat annoying...
Axel's MVP doesn't make a TFTP request at all.
neither on port 69 nor on port 16869.
will try this tomorrow:
http://mvpmc.wikispaces.com/H2+Linux+Boot+-+NEW
[/edit]
ok...
mvprelay was the answer.
MVP now sucks in the dongle.bin(.ver).
vompclient starts but doesn't show live TV and crashes.
might have something to do with using a 0.2.6 dongle with 0.2.5 vompserver *grin*
...no gcc on that mahlzeit thingy :-(
maybe someone has still a 0.2.5 dongle for Axel flying around?
but wait..
is this still valid?
http://www.loggytronic.com/dl/vomp-dongle-0.2.5
you may wanna give this one a try, Axel.
Yes, old version downloads are still valid at the moment. Though I don't know how long that will last - loggytronic.com is slowly running out of space.
As for this nightmare of booting MVPs.. I think it needs a detailed investigation with each step of the way documented properly. Maybe wiki style, with a page per step including how to get it working, common problems at that step and solutions.
I would contribute more myself to all these threads about MVP boot problems if I could remember how it works... ;)
hmm.
have just read through your (Chris') bugfix history and saw that MVPRelay
was introduced in 0.2.6.
so setting up a proper environ. with gcc and stuff might be
a good idea for you Axel :)
Hello,
everything works great. If anyone have a problem, i can wich you that you know Harry a great linux-master.
thanx a lot
Axel
Hello,
i have got a problem again. i have deaktivate the dhcp in my fritzbox and now the mvp can not find a server. Where i have to lookr for the mvprelay ? Perhaps there is a wrong ip adress ?
i can not find a logfile but in my vomp.conf the logfile ist aktivated.
Thanks for help
Axel