Print Page - VOMP and Streamdevclient

Title: VOMP and Streamdevclient
Post by: Lodda on October 23, 2005, 12:39:21

Hey Chris,
I've just installed VOMP and i am "vomping around" because of this great software.

GOOD STUFF !!!!

I have 2 servers running now. One is

1.Linvdr; 4dvb-S;MVP and Streamdevserver
the other is
2.VDR(handmade);1dvb-s with very low signal;VOMP; Streamdevclient

The streamdevclient in 2 is working well and receives signals from 1.

unfortunately the vomp says to me that ALL channels are unavailable as long as the streamdevclient is switched on. If i switch the streamdev off the vomp works perfectly with the one or two channels i receive over the DVB-S card.

Is there a possibility to change this behavior (e.g. to change the ports of streamdev) so i can receive the other channels with VOMP over streamdev in 2, too ?

Thank you very much for a answer.
Lodda

Title: Re: VOMP and Streamdevclient
Post by: AronSira on October 23, 2005, 18:14:43

Hi,

.. did you try this: http://vdrportal.de/board/thread.php?threadid=39782&sid= ?

@Chris: I suggest to try to make this an option for VOMP - if possible (Priority of VOMP-Client).
Anyway - Great work!

Have a nice day,
Robert

Title: Re: VOMP and Streamdevclient
Post by: Lodda on October 24, 2005, 08:48:26

Hi Robert!
I changed the priority in mvpreceiver.c to 8 and put a doubleslash before return NULL in line 18;
The change:
Now if i switch channels at mvp the VDR hangs totally and i need to restart the VDR.
Does it make sense if i use an other number than 8 ??
Anyway thanks for your answer.
Lodda

Title: Re: VOMP and Streamdevclient
Post by: AronSira on October 24, 2005, 19:13:47

Sorry,

.. but this seems not to be a problem of priority, but a problem specific to the configuration of streamdevclient and vomp on one machine ?
Sorry for the inconvinience,
Robert

Title: Re: VOMP and Streamdevclient
Post by: Lodda on October 25, 2005, 07:37:45

Hi Robert,
that are definitivly no inconveniences, to go deeper into the topic is to learn more about the stuff and that is great !!
;)
Maybe Chris, has an idea for solving that Problem.
Lodda

Title: Re: VOMP and Streamdevclient
Post by: Chris on October 26, 2005, 23:46:53

If the VDR stops after 30 seconds of it working then I think I know what is wrong, and I am working on it. If not then I have no idea what this problem is.

Title: Re: VOMP and Streamdevclient
Post by: Lodda on October 28, 2005, 10:55:25

hi chris,
GREAT that you are back!

i will test it again during the weekend.
Could it be possible that vomp and streamdevserver 0.3.3-pre3-geni don't work together?

Lothar

Title: Re: VOMP and Streamdevclient
Post by: Chris on October 29, 2005, 23:36:19

Lodda, on a second re-reading of your initial post it has just clicked with me what your setup is like. Unfortunately it brings me no closer to offering a solution other than the VDR priority system in the new dongle... Try it and let me know if it makes any difference!

Title: Re: VOMP and Streamdevclient
Post by: Lodda on November 01, 2005, 10:11:50

Hi Chris,
sorry for my late answer but my second VDR machine crashed, meaning that i have no chance to test, right now.
ASAP i will try to be back.
Lodda :D

Title: Re: VOMP and Streamdevclient
Post by: Lodda on November 04, 2005, 13:17:47

Hi Chris, GREAT! It runs perfectly. :D :D :D
the only thing now is that i have artefakts on the stream (100mbit network) but i gues it is an other problem, is it?

Lodda

Loggytronic Forum

VOMP => VOMP General / MVP => Topic started by: Lodda on October 23, 2005, 12:39:21