Topics

I have just installed VOMP client and dongle 0.2.1. I am using VDR 1.3.20 and I am still using mvploader as BOOTP and TFTP server.
When trying to set a timer from the EPG I always get the message "Failure setting timer" on TV. Looking to the log file on the VDR server I've found the following entries "Config - Config error: Section Timers not found" and after that "Client - Written config load failed packet".
As I have used the sample config files vomp.conf and vomp-MAC.conf like described on the homepage, I don't know what to do else to get the timers function.

The 16:9 letterbox works fine on my 4:3 TV.

Unfortunately the changes made for the actual dongle seem to have some side effects. I have a PAL version of the MediaMVP. The MediaMVP is not directly connected to the TV but looped through my satellite receiver.

First I have observed that the picture quality has get noisy (OSD and "Live TV"). The picture quality is fine during booting. With dongle 0.0.11 the picture quality is also fine (in every situation). I have made sure that the video output has been set to "RGB+composite".

Second the video output seems not to shut off entirely when going from "Live TV" into stand-by mode (this seems not to be a problem when going from OSD to stand-by mode). That means that when I activate the stand-by mode while running the satellite receiver in the background I don't get anymore the video of the satellite receiver on TV like with dongle 0.0.11.

I hope that you can also reproduce the problems.

Cheers,
radiofreak