Messages

hello, great that the vomp now can play videos and dvds. My problem is that i don´t know how i have to update my mahlzeit vdr with vomp ?

Can anybody help me ?


greets Axel

Hello,

i can decide ffdshow video decoder or cyperlink video/Sp decoder. i have installed power dvd 5. should i update it ?


greets

Axel

thanx, could you tell how i can get information about the installed video codec?

Hello,

i use vomp with my myp an it works well. Now i want to use "vomp for windows" but it crashed when i want try livetv or recordings, but radio works well.

What do i have to do?

greets

Axel

Hello,

i have got a problem again. i have deaktivate the dhcp in my fritzbox and now the mvp can not find a server. Where i have to lookr for the mvprelay ? Perhaps there is a wrong ip adress ?

i can not find a logfile but in my vomp.conf the logfile ist aktivated.


Thanks for help

Axel

Hello,

everything works great. If anyone have a problem, i can wich you that you know Harry a great linux-master.

thanx a lot

Axel

Hello,

i hope i give you all the detail information you need.

On my VDR i install the Distribution Mahlzeit. All my Computers are connected over the DSL Router Fritzbox with DHCP.
Where can i configurate the MAC Adresse and anything else ?


Greets

Axel

Hello,

is there anything i have to configurate after install the plugin by using the setup-menu from my vdr ?


greets

Axel

in my AVM Fritzbox Router i make a portforwarding so it should be work, but i doesnt work. I in an other Forum i read someting about MAC Adresse and TFTP Server and MVPLoader ?

Have i install anyting else ?

Hello,

my logfile :

linvdr:~# logread
Dec 28 15:18:57 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Dec 28 15:18:57 linvdr user.info kernel: 8139too Fast Ethernet driver 0.9.27
Dec 28 15:18:57 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Dec 28 15:18:57 linvdr user.debug kernel: PCI: setting IRQ 10 as level-triggered
Dec 28 15:18:57 linvdr user.info kernel: GSI 10 (level, low) -> IRQ 10
Dec 28 15:18:57 linvdr user.info kernel: eth0: RealTek RTL8139 at 0xd097e000, 00:a1:b0:a2:df:8f, IRQ 10
Dec 28 15:18:57 linvdr user.debug kernel: eth0:  Identified 8139 chip type 'RTL-8139B'
Dec 28 15:18:57 linvdr local0.info udhcpc[1243]: udhcpc (v0.9.9-pre) started
Dec 28 15:18:57 linvdr user.info kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Dec 28 15:18:57 linvdr local0.debug udhcpc[1243]: Sending discover...
Dec 28 15:18:57 linvdr user.info kernel: Linux video capture interface: v2.00
Dec 28 15:18:57 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Dec 28 15:18:57 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
Dec 28 15:18:57 linvdr user.debug kernel: PCI: setting IRQ 5 as level-triggered
Dec 28 15:18:57 linvdr user.info kernel: GSI 5 (level, low) -> IRQ 5
Dec 28 15:18:57 linvdr user.warn kernel: found saa7146 @ mem d0b62000 (revision 1, irq 5) (0x13c2,0x000a).
Dec 28 15:18:57 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X).
Dec 28 15:18:58 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:04:4a:31
Dec 28 15:18:58 linvdr local0.debug udhcpc[1243]: Sending select for 192.168.178.24...
Dec 28 15:18:58 linvdr local0.info udhcpc[1243]: Lease of 192.168.178.24 obtained, lease time 864000
Dec 28 15:18:58 linvdr auth.info sshd[1315]: Server listening on 0.0.0.0 port 22.
Dec 28 15:18:58 linvdr daemon.info init: ^MStarting pid 1325, console /dev/tty1: '/sbin/getty'
Dec 28 15:18:58 linvdr daemon.info init: ^MStarting pid 1326, console /dev/tty2: '/sbin/getty'
Dec 28 15:18:58 linvdr daemon.info init: ^MStarting pid 1328, console /dev/tty3: '/sbin/getty'
Dec 28 15:18:58 linvdr daemon.info init: ^MStarting pid 1330, console /dev/tty4: '/sbin/getty'
Dec 28 15:18:59 linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
Dec 28 15:18:59 linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Dec 28 15:18:59 linvdr user.warn kernel: dvb-ttpci: DVB-C analog module @ card 0 detected, initializing MSP3415
Dec 28 15:19:00 linvdr user.warn kernel: saa7113 not accessible.
Dec 28 15:19:00 linvdr user.warn kernel: saa7146 (0): registered device video0 [v4l2]
Dec 28 15:19:00 linvdr user.warn kernel: saa7146 (0): registered device vbi0 [v4l2]
Dec 28 15:19:00 linvdr user.warn kernel: DVB: registering frontend 0 (ST STV0297 DVB-C)...
Dec 28 15:19:00 linvdr user.info kernel: input: DVB on-card IR receiver as /class/input/input2
Dec 28 15:19:00 linvdr user.info kernel: dvb-ttpci: found av7110-0.
Dec 28 15:19:00 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Dec 28 15:19:00 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Dec 28 15:19:00 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
Dec 28 15:19:00 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Dec 28 15:19:00 linvdr user.info kernel: flexcop-pci: will use the HW PID filter.
Dec 28 15:19:00 linvdr user.info kernel: flexcop-pci: card revision 2
Dec 28 15:19:00 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Dec 28 15:19:00 linvdr user.debug kernel: PCI: setting IRQ 11 as level-triggered
Dec 28 15:19:00 linvdr user.info kernel: GSI 11 (level, low) -> IRQ 11
Dec 28 15:19:00 linvdr user.warn kernel: DVB: registering new adapter (FlexCop Digital TV device).
Dec 28 15:19:00 linvdr user.info kernel: b2c2-flexcop: MAC address = 00:d0:d7:0d:e1:97
Dec 28 15:19:00 linvdr user.err kernel: b2c2-flexcop: i2c master_xfer failed
Dec 28 15:19:00 linvdr user.err kernel: b2c2-flexcop: i2c master_xfer failed
Dec 28 15:19:00 linvdr user.info kernel: b2c2-flexcop: found the mt352 at i2c address: 0x0f
Dec 28 15:19:00 linvdr user.warn kernel: DVB: registering frontend 1 (Zarlink MT352 DVB-T)...
Dec 28 15:19:00 linvdr user.info kernel: b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Dec 28 15:19:00 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Dec 28 15:19:00 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Dec 28 15:19:01 linvdr user.info kernel: lirc_serial: auto-detected active high receiver
Dec 28 15:19:01 linvdr user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Dec 28 15:19:02 linvdr user.info vdr: [1400] VDR version 1.4.4-2-Toxic-Ed. started
Dec 28 15:19:02 linvdr user.info vdr: [1400] Bigpatch 17.09.2006 is active!
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-dvdconvert.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-image.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-pcd.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-streamdev-server.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-tvtv.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-vompserver.so.1.4.5
Dec 28 15:19:02 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-weatherng.so.1.4.5
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-wirbelscan.so.1.4.5
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading plugin: /usr/lib/vdr/plugins/libvdr-burn.so.1.4.5
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/setup.conf
Dec 28 15:19:03 linvdr user.err vdr: [1400] ERROR: unknown config parameter: RecordDolbyDigital = 1
Dec 28 15:19:03 linvdr user.err vdr: [1400] ERROR: unknown config parameter: ShowProgressBar = 0
Dec 28 15:19:03 linvdr user.err vdr: [1400] ERROR: unknown config parameter: SortTimers = 1
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/sources.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/diseqc.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/channels.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/timers.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/commands.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/reccmds.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/svdrphosts.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/remote.conf
Dec 28 15:19:03 linvdr user.info vdr: [1400] loading /etc/vdr/keymacros.conf
Dec 28 15:19:03 linvdr user.debug vdr: [1407] video directory scanner thread started (pid=1407, tid=1407)
Dec 28 15:19:03 linvdr user.debug vdr: [1408] video directory scanner thread started (pid=1408, tid=1408)
Dec 28 15:19:03 linvdr user.debug vdr: [1400] reading EPG data from /video0/epg.data
Dec 28 15:19:03 linvdr user.debug vdr: [1400] probing /dev/dvb/adapter0/frontend0
Dec 28 15:19:04 linvdr user.debug vdr: [1407] video directory scanner thread ended (pid=1407, tid=1407)
Dec 28 15:19:04 linvdr user.debug vdr: [1408] video directory scanner thread ended (pid=1408, tid=1408)
Dec 28 15:19:05 linvdr user.debug vdr: [1410] tuner on device 1 thread started (pid=1410, tid=1410)
Dec 28 15:19:05 linvdr user.debug vdr: [1411] section handler thread started (pid=1411, tid=1411)
Dec 28 15:19:05 linvdr user.debug vdr: [1400] probing /dev/dvb/adapter1/frontend0
Dec 28 15:19:05 linvdr user.debug vdr: [1400] probing /dev/dvb/adapter2/frontend0
Dec 28 15:19:05 linvdr user.info vdr: [1400] found 2 video devices
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: dvd (0.3.6-b03): turn VDR into an (almost) full featured DVD player
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: dvdconvert (0.2.5): Plugin for dvdconvert with dvd2vdr dvd2dvd
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: image (0.2.6): A Image Viewer plugin
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: mp3 (0.9.15): A versatile audio player
Dec 28 15:19:05 linvdr user.debug vdr: [1413] tuner on device 2 thread started (pid=1413, tid=1413)
Dec 28 15:19:05 linvdr user.debug vdr: [1414] section handler thread started (pid=1414, tid=1414)
Dec 28 15:19:05 linvdr user.info vdr: [1400] loading /etc/vdr/plugins/mp3sources.conf
Dec 28 15:19:05 linvdr user.err vdr: [1400] WARNING: source base /dev/cdrom expands to /dev/hdb
Dec 28 15:19:05 linvdr user.err vdr: [1400] WARNING: source base /dev/hdb is not a directory
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: osdteletext (0.5.1): Displays teletext on the OSD
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: pcd (0.0.3): PhotoCD Player
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: streamdev-server (0.3.3-pre3-geni): VDR Streaming Server
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: tvonscreen (0.7.1): Shows the EPG info in form of a typical TV magazine
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: tvtv (0.3.1): TVTV Timers update
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: vcd (0.7): VideoCD Player
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: vompserver (0.2.5): VDR on MVP plugin by Chris Tallon
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: weatherng (0.0.8-pre3): Weather.com: Weather forecast
Dec 28 15:19:05 linvdr user.err vdr: [1400] weatherng: Parameter '-D' not set.  Set default value : /etc/vdr/plugins/weatherng
Dec 28 15:19:05 linvdr user.err vdr: [1400] weatherng: Parameter '-I' not set.  Set default value : /etc/vdr/plugins/weatherng
Dec 28 15:19:05 linvdr user.err vdr: [1400] weatherng: Parameter '-S' not set.  Set default value : /etc/vdr/plugins/weatherng
Dec 28 15:19:05 linvdr user.debug vdr: [1400] DEBUG : weatherng: defined HAVE_IMLIB2
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: wirbelscan (0.0.2): dvb c/t/s/analog scan
Dec 28 15:19:05 linvdr user.info vdr: [1400] initializing plugin: burn (0.0.009): Versatile convert-and-burn plugin
Dec 28 15:19:05 linvdr user.info vdr: [1400] setting primary device to 1
Dec 28 15:19:05 linvdr user.info vdr: [1400] SVDRP listening on port 2001
Dec 28 15:19:05 linvdr user.info vdr: [1400] setting current skin to "classic"
Dec 28 15:19:05 linvdr user.info vdr: [1400] loading /etc/vdr/themes/classic-default.theme
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: dvd
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: dvdconvert
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: image
Dec 28 15:19:05 linvdr user.info vdr: [1400] loading /etc/vdr/plugins/imagesources.conf
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: mp3
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: osdteletext
Dec 28 15:19:05 linvdr user.err vdr: [1400] osdteletext: no translation found for 'Play' in language 1 (Deutsch)
Dec 28 15:19:05 linvdr user.err vdr: [1400] osdteletext: no translation found for 'FastFwd' in language 1 (Deutsch)
Dec 28 15:19:05 linvdr user.err vdr: [1400] osdteletext: no translation found for 'FastRew' in language 1 (Deutsch)
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: pcd
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: streamdev-server
Dec 28 15:19:05 linvdr user.info vdr: [1400] loading /etc/vdr/plugins/streamdevhosts.conf
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: tvonscreen
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: tvtv
Dec 28 15:19:05 linvdr user.err vdr: [1400] TVTV: Error reading '/etc/vdr/plugins/tvtv_channelmap.conf'!
Dec 28 15:19:05 linvdr user.debug vdr: [1400] TVTV: Packed String: 1O4XBDRtc13hWaMbesyBkg==
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: vcd
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: vompserver
Dec 28 15:19:05 linvdr user.debug vdr: [1400] VOMP: Config file found
Dec 28 15:19:05 linvdr user.debug vdr: [1400] VOMP: Logging disabled
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: weatherng
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: wirbelscan
Dec 28 15:19:05 linvdr user.info vdr: [1400] starting plugin: burn
Dec 28 15:19:05 linvdr user.debug vdr: [1400] remote control LIRC - keys known
Dec 28 15:19:05 linvdr user.debug vdr: [1400] remote control KBD - keys known
Dec 28 15:19:05 linvdr user.debug vdr: [1415] streamdev server thread started (pid=1415, tid=1415)
Dec 28 15:19:05 linvdr user.info vdr: [1415] Streamdev: Listening (VTP) on port 2004
Dec 28 15:19:05 linvdr user.info vdr: [1415] Streamdev: Listening (HTTP) on port 3000
Dec 28 15:19:05 linvdr user.debug vdr: [1418] LIRC remote control thread started (pid=1418, tid=1418)
Dec 28 15:19:05 linvdr user.debug vdr: [1419] KBD remote control thread started (pid=1419, tid=1419)
Dec 28 15:19:09 linvdr user.info vdr: [1410] CAM: AlphaCrypt Light, 01, 4A20, 4A20
Dec 28 15:19:09 linvdr user.info vdr: [1400] switching to channel 13
Dec 28 15:19:09 linvdr user.debug vdr: [1400] creating directory /vtx/T-8468-5633-130
Dec 28 15:19:09 linvdr user.debug vdr: [1400] setting watchdog timer to 900 seconds
Dec 28 15:19:09 linvdr user.debug vdr: [1420] transfer thread started (pid=1420, tid=1420)
Dec 28 15:19:09 linvdr user.debug vdr: [1421] receiver on device 2 thread started (pid=1421, tid=1421)
Dec 28 15:19:09 linvdr user.debug vdr: [1423] TS buffer on device 2 thread started (pid=1423, tid=1423)
Dec 28 15:19:10 linvdr user.debug vdr: [1420] setting audio track to 1 (0)
Dec 28 15:19:19 linvdr user.debug vdr: [1400] max. latency time 1 seconds
Dec 28 15:19:30 linvdr cron.notice crond[1435]: crond 2.3.2 dillon, started, log level 8
Dec 28 15:19:33 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2167 - accepted
Dec 28 15:19:33 linvdr user.err vdr: [1400] dvdconvert: no translation found for 'Plugin for dvdconvert with dvd2vdr dvd2dvd' in language 1 (Deutsch)
Dec 28 15:19:33 linvdr user.err vdr: [1400] tvonscreen: no translation found for 'Shows the EPG info in form of a typical TV magazine' in language 1 (Deutsch)
Dec 28 15:19:43 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:43 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2168 - accepted
Dec 28 15:19:44 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:52 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2169 - accepted
Dec 28 15:19:52 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:53 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2170 - accepted
Dec 28 15:19:53 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:53 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2171 - accepted
Dec 28 15:19:53 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:19:59 linvdr auth.info sshd[1521]: Accepted password for root from 192.168.178.20 port 1744 ssh2
Dec 28 15:19:59 linvdr auth.info PAM_unix[1521]: (ssh) session opened for user root by (uid=0)
Dec 28 15:19:59 linvdr auth.err PAM-env[1521]: Unable to open config file: No such file or directory
Dec 28 15:19:59 linvdr auth.err PAM-env[1522]: Unable to open config file: No such file or directory
Dec 28 15:20:01 linvdr cron.notice crond[1435]: USER root pid 1524 cmd convert.pl -q -s
Dec 28 15:20:44 linvdr user.info vdr: [1400] connect from 127.0.0.1, port 2172 - accepted
Dec 28 15:20:44 linvdr user.info vdr: [1400] closing SVDRP connection
Dec 28 15:22:06 linvdr auth.info sshd[1569]: Accepted password for root from 192.168.178.20 port 1756 ssh2
Dec 28 15:22:06 linvdr auth.info sshd[1569]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Dec 28 15:22:06 linvdr auth.info PAM_unix[1569]: (ssh) session opened for user root by (uid=0)
Dec 28 15:22:06 linvdr auth.err PAM-env[1569]: Unable to open config file: No such file or directory
Dec 28 15:22:06 linvdr auth.info sshd[1570]: lastlog_write_filemode: Error writing to /var/log/lastlog: No space left on device
Dec 28 15:22:06 linvdr auth.err PAM-env[1570]: Unable to open config file: No such file or directory
Dec 28 15:25:01 linvdr cron.notice crond[1435]: USER root pid 1732 cmd convert.pl -q -s
Dec 28 15:25:39 linvdr auth.info PAM_unix[1569]: (ssh) session closed for user root
Dec 28 15:25:39 linvdr auth.err sshd[1569]: PAM pam_putenv: delete non-existent entry; MAIL
Dec 28 15:25:39 linvdr auth.err PAM-env[1569]: Unable to open config file: No such file or directory
Dec 28 15:25:55 linvdr auth.info sshd[1748]: Accepted password for root from 192.168.178.20 port 1809 ssh2
Dec 28 15:25:55 linvdr auth.info sshd[1748]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Dec 28 15:25:55 linvdr auth.info PAM_unix[1748]: (ssh) session opened for user root by (uid=0)
Dec 28 15:25:55 linvdr auth.err PAM-env[1748]: Unable to open config file: No such file or directory
Dec 28 15:25:55 linvdr auth.info sshd[1754]: lastlog_write_filemode: Error writing to /var/log/lastlog: No space left on device
Dec 28 15:25:55 linvdr auth.err PAM-env[1754]: Unable to open config file: No such file or directory
linvdr:~#

is anything wrong ?

greets
Axel

thanks for the quick answer. How can i check the logs ? where did the files saved ?

Greets Axel

Hello,

i use Mahlzeit VDR and now i want to install VOMP Server Plugin to stream to my MediaMVP Version H3.
i have use the setup to install the plugin but until now nothing work. The MediaMVP cant find a Server.

What should i do ?

greats Axel